Heat Resistant LED Flexi Strip Specifications

Single Colour Heat Resistant LED Flexi Strip specifications

Our Heat Resistant LED Flexi Strip is not fire proof and must not be exposed to naked flames or excessive heat which would melt the silicon protecting the strip or the plastic extrusion used to secure the strip in place. We are not responsible for where the strip is put once sold, so we ask all potential purchasers and users to be cautious and observe the strip can only operate within Ta -40° ~ +100°C (Ta – 40°~+212°F).

• IP67   (water and dust proof)
• 24V
• 4.8W and 80leds per metre
• CRI80
• Certification: CE, RoHS, UL.
• LEDs 12.5mm apart and cut point is 100mm
• Mountable by PVC profile (1M length) but only to be used in environments up to 65°C.
• Fixed to surface using Heat-Resistant silicone clips and screws (just 10mm long)
• Available in colour temperatures, 2700K (780lm), 3000K (830lm/m), 4000K (850lm/m) and 6500K (850lm/m)
• P/N:  JL-HT-IP67-3030-10-80-4.8W-24V-2700K/3000K/4000K/6500K

Accessories for this item

• PVC Channel  (up to 65°C) (The strip sits inside the channel and is fixed by screws. Dms 1000×10×10mm). This LED strip must not be put inside conventional aluminium profile. The strip generates heat and if trapped inside the profile it will fail prematurely.
• Silicone Fixed Clip (up to 150°C) (The clip resembles a small bracket and goes over the top of the strip and is fixed by two screws. (Supplied in bags of 5pcs, 10pcs or 15pcs)
• Silicone End Cap without hole. (Supplied in 5pcs bags)
• Silicone End Cap with hole. (Supplied in 5pcs bags)
• Tubes of Glue. (Sold singularly)
• LED Drivers rated 24V rated from 14W-60W.

Single colour wiring diagrams

JLEDS Wire Diagram – Basic Set Up (no dimming)

JLEDS Wire Diagram – Dimmer Switch

JLEDS Wire Diagram – Basic Control and Remote

JLEDS Wire Diagram – Smart Control and Remote

JLEDS Wire Diagram – Dimmable Driver